3D print Arizona Mills
A free, printable model of Arizona Mills with its parking lots, freeways and nearby streets, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About Arizona Mills
Arizona Mills, a super-regional outlet mall, is in Tempe, Arizona, part of the Phoenix metropolitan area. It occupies the southeast corner at the junction of US 60 and I-10. Mills Corporation, Taubman Centers and Simon DeBartolo Group developed it as a joint venture, announced on March 24, 1996, as part of the "shoppertainment" model that combined retail outlets with entertainment.
The partners chose a parcel of 115 acres (47 ha) that Taubman Centers had owned, and agreed to build an outlet mall of 1.2 million square feet (110,000 m2) there. The grand opening came on November 20, 1997, bringing approximately 200 retailers and 6,000 parking spaces.
Inside, the mall is divided into six "neighborhoods", concourses that originally each had a distinct architectural style, meant to help shoppers find their way. Renovations have since "de-themed" them. Three days after the opening, an IMAX 3D prototype debuted there; it later became a 24-screen Harkins movie theater. Legoland Discovery Center, developed at a cost of $12 million, held a grand opening on April 22, 2016.
How it prints
Make this print opens the generator on a 1400 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 2 mm | 1:8,750 |
| 200 mm | 2 mm | 1:7,000 |
| 256 mm | 2 mm | 1:5,469 |
-
North
-
East
-
South
-
West
- A wide, low roof
- The mall is a broad, nearly flat roof dotted with tiny rooftop units. A larger print keeps those details; Print friendly adapts them on a small print, and 0.12 mm layers keep the roof edges clean.
- One piece with the ground
- Arizona Mills is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Arizona Mills takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
Arizona Mills is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there an Arizona Mills STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. Arizona Mills grows with the print: about 2 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
