A white 3D print of the Boyana Church, a small church with a central octagonal cupola and low hipped roofs, standing on open green ground with paths.

3D print the Boyana Church

A free, printable model of the Boyana Church in Sofia, a small church with a central cupola on open green ground with paths, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Boyana Church model, North view North
  • Boyana Church model, East view East
  • Boyana Church model, South view South
  • Boyana Church model, West view West

© OpenStreetMap contributors

The model you print

Boyana Church in 3D

The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.

Drag to turn it. Scroll or pinch to zoom.

On a 160 mm print
3 mm
Scale
1:3,750

3 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Small cupolas and cross

    The octagonal cupola on the central wing has a tiny cross on top, and a smaller drum sits on the eastern roof. A larger print keeps them; Print friendly adapts the smallest parts.

  2. Shallow arches and a thin stair

    The blind arches on the walls and the narrow stair on the south side are shallow, fine details. Full detail keeps them, and a layer height of 0.12–0.16 mm keeps them crisp.

  3. One piece with the ground

    The Boyana Church is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Boyana Church takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About the Boyana Church

The Boyana Church is a medieval Bulgarian Orthodox church in the Boyana quarter on the edge of Sofia, the capital of Bulgaria. It has been on the UNESCO World Heritage List since 1979. The two-story building grew in three stages. Its east wing was built in the late tenth or early eleventh century. Under the Second Bulgarian Empire, in the 13th century, a central wing joined it, and a westward expansion in the mid-19th century finished the building.

The oldest part, the eastern church, is a small cross-vaulted church with one apse and inbuilt cruciform supports. Sebastocrator Kaloyan and his wife Desislava commissioned the second section in the mid-13th century. It is a two-floor tomb-church, with a family sepulchre on the ground floor and a family chapel above. Ceramic ornaments decorate its exterior. Donations from the local community paid for the last section, built in the mid-19th century.

Its frescoes from 1259, which form a second layer over earlier paintings, are the main reason for its worldwide fame. They are regarded as among the best-preserved and most complete examples of medieval art in the Balkans. The walls show 89 scenes with 240 human images in total. In 1954 the church was closed to visitors for conservation and restoration, and it was fully reopened on October 2, 2008.

About this model

The Boyana Church is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Same skyline

More landmarks in Sofia

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits