A white 3D print of the Sofia Synagogue, with a large ribbed central dome and a ring of small onion domes, hemmed in by streets and taller neighboring buildings.

Sofia Synagogue in 3D

The Sofia Synagogue appears in city models you make here; its design may still be protected, so it isn't offered as a separate download.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Sofia Synagogue model, North view North
  • Sofia Synagogue model, East view East
  • Sofia Synagogue model, South view South
  • Sofia Synagogue model, West view West

© OpenStreetMap contributors

Copyright notice

The design of Sofia Synagogue may still be protected by copyright. It appears in the city models you make here, but it is not offered as a separate model.

Real height
31 m
On a 160 mm print
9 mm
Scale
1:3,750

31 m of the Sofia Synagogue, 9 mm on your shelf

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Many small onion domes

    A ring of small onion domes and two slender towers surround the big central dome. Print friendly adapts these thin tops to the print scale; Full detail keeps them for larger prints.

  2. Ribbed dome and arched facade

    The large dome is ribbed and the walls carry rows of tall arches. A layer height of 0.12-0.16 mm keeps the curves smooth, and a bigger print keeps the arches crisp.

  3. One piece with the ground

    The Sofia Synagogue is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Sofia Synagogue takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About the Sofia Synagogue

The Sofia Synagogue is a synagogue and Romaniote Orthodox Jewish congregation in the center of Sofia, Bulgaria, near the Central Market Hall. Completed in 1909, it ranks as Southeastern Europe's largest synagogue and the third-largest in Europe. It was built for Sofia's mainly Sephardic Jewish community to a design by the Austrian architect Friedrich Grünanger, and its look echoes the Moorish Leopoldstädter Tempel in Vienna.

Preparations began in 1903 and construction on November 13, 1905. The synagogue was officially opened on September 9, 1909, with King Ferdinand I of Bulgaria attending. The project was part of the reorganization of the Bulgarian Jewish community under Chief Rabbi Marcus Ehrenpreis together with community figures Ezra Tadjer and Avram Davidjon Levy. An older synagogue had stood on the lot before. Since May 8, 1992, the building has also housed the Jewish Museum of History.

The style is predominantly Moorish Revival and Byzantine Revival, adding touches of the Vienna Secession, with Venetian architecture on the facade. The main premises measure 20 meters (66 ft) across and 31 meters (102 ft) high, and an octagonal dome sits on top. Inside are columns of Carrara marble, multicolored Venetian mosaics and decorative woodcarving. The main chandelier, the country's largest, weighs 1.7 tonnes. The whole building covers 659 square meters (7,090 sq ft).

About this model

The Sofia Synagogue is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Same skyline

More landmarks in Sofia

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits