3D print the Bremen Town Hall
A free, printable model of Bremen Town Hall on its market square, with the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 9 mm
- Scale
- 1:3,750
9 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Wide, low hall
The hall is wide and low, with long walls and a large roof. A bigger print keeps the front crisp, and 0.12 to 0.16 mm layers help the vertical lines read cleanly.
- One piece with the ground
The Bremen Town Hall is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Bremen Town Hall takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Bremen Town Hall
Bremen Town Hall faces the market square from its northeastern edge, in the historic heart of Bremen, Germany. It is the seat of Bremen's Mayor, who is also President of the Senate. Architecturally it counts among Europe's most important Brick Gothic and Weser Renaissance buildings. The original building dates from the 15th century: a two-story rectangle of 41.5 by 15.8 m. Inside, a single big hall with oak pillars fills the ground floor; merchants used it in the past, and the main hall upstairs served for festivities.
Around 1400, at the peak of Bremen's growth, the city planned and erected a new town hall. The driving figures were Hinrich von der Trupe and Friedrich Wagner, councilmen, with burgomaster Johann Hemeling. The hall, not the cathedral or the archbishop's palace, became the square's dominant building. Between 1595 and 1596, ten windows on the square side were changed from pointed arches to big rectangles; between 1608 and 1612 the front was rebuilt in Weser Renaissance style, with reliefs and a decorated gable. Lüder von Bentheim, an architect and mason, led the modernization.
A New Town Hall, roughly double the size of the old one, was added in 1909–1913 to plans by Munich architect Gabriel von Seidl. Since 1973 the building has been protected as a historical monument, and it entered the UNESCO World Heritage list in July 2004 alongside the Bremen Roland statue. The old upper hall hosts ceremonial occasions, and the lower hall is used for exhibitions.
About this model
The Bremen Town Hall is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
