3D print Bremen Cathedral
A free, printable model of Bremen Cathedral and the surrounding market square and city buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- Real height
- 98 m
- On a 160 mm print
- 25 mm
- Scale
- 1:3,750
98 m of Bremen Cathedral, 25 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Twin west towers
The two west towers rise above the roof, so their tops are the parts to watch. Print slowly with good cooling there, and use 0.12 to 0.16 mm layers to keep their openings crisp.
- Brickwork and small openings
Brick walls and small window openings are the finest features here. Print friendly adapts the thinnest to the print scale; Full detail keeps them on a larger print or a fine nozzle.
- One piece with the ground
Bremen Cathedral is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Bremen Cathedral takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Bremen Cathedral
Bremen Cathedral, also called St. Petri Dom, stands on the market square at the heart of Bremen, Germany. It belongs to the Bremian Evangelical Church, which is part of the Evangelical Church in Germany, and it served as cathedral for what was then the Roman Catholic Prince-Archbishopric of Bremen. Two crypts form its oldest visible parts, while the west towers and the lower west front were its last Romanesque work in sandstone. Brick vaults and walls went up from the late 1220s, though sandstone sheets still hide much of them. It ranks among Europe's largest historic brick structures, yet too much stone remains to call it Brick Gothic.
A timber church raised around 789 by Saint Willehad, a missionary to the Frisians, was the first church on the site. Saxon raiders burned Bremen and that church three years afterward. Bishop Willerich then began a replacement in local sandstone, built in stages. After 1043 Archbishop Adalbert turned the cathedral into a pillared basilica, with round Romanesque arches, a flat wooden ceiling, twin short towers at the west end and a crypt; its plan followed Benevento Cathedral in Italy. Gothic vaults and a new northern nave came later.
A restoration between 1888 and 1901 rebuilt the west towers and most of the west front in forms close to the originals, and added a crossing tower modeled on the one at Worms Cathedral. The transept roofs and the roof over the northern aisle were redesigned. The monument protection act has covered the cathedral since 1973.
About this model
Bremen Cathedral is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
