A white 3D print of the Church of San Pedro de Nora, a long, low church with a raised central nave and lower aisles, with a road and a river nearby.

3D print the Church of San Pedro de Nora

A free, printable model of the Church of San Pedro de Nora and the roads, river and houses around it, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Church of San Pedro de Nora model, North view North
  • Church of San Pedro de Nora model, East view East
  • Church of San Pedro de Nora model, South view South
  • Church of San Pedro de Nora model, West view West

© OpenStreetMap contributors

The model you print

Church of San Pedro de Nora in 3D

The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.

Drag to turn it. Scroll or pinch to zoom.

On a 160 mm print
2 mm
Scale
1:3,750

2 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Low roofs and shallow wall details

    The nave and side aisles have long, low roofs, and the walls carry small windows and relief details. Print friendly adapts small details to the print scale; a bigger print keeps them, and 0.12–0.16 mm layers help.

  2. Three small arches at the east end

    The three small arches at the east end are among the finest features. Use Full detail on a larger print, or a fine nozzle, to keep them open.

  3. One piece with the ground

    The Church of San Pedro de Nora is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Church of San Pedro de Nora takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About the Church of San Pedro de Nora

The Church of San Pedro de Nora (Iglesia de San Pedro de Nora), also called Saint Peter of Nora, is a Pre-Romanesque Roman Catholic church in Las Regueras, Asturias, Spain. It stands next to the Nora river, roughly 12 km from Oviedo. Its first record is a donation document from 905, issued by Alfonso III of Asturias. It resembles two other churches, San Julián de los Prados and Santa María de Bendones, and probably dates from the time of Alfonso II of Asturias.

The church was declared a National Monument in 1931. A fire during the Spanish Civil War, in 1936, left it without its roof. Luis Menéndez Pidal y Alvarez restored it. The separate bell tower is not original; it comes from an initiative of the same architect in the 1970s.

Its design follows San Julián de los Prados. The church faces east and has a vestibule apart from the main structure, plus a basilica-type plan in which the central nave rises above the side aisles. The nave has an intersecting wooden roof, and its windows have stone lattice. At the east end the straight sanctuary is split into three apses with barrel vaults, and doors with semicircular arches connect the apses through the dividing walls.

About this model

The Church of San Pedro de Nora is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Same skyline

More landmarks in Oviedo

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits