3D print Santa María del Naranco
A free, printable model of Santa María del Naranco and the lawns and paths around it on the slope of Mount Naranco, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Santa María del Naranco in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 3 mm
- Scale
- 1:3,750
3 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Open arches at each end
Each end of the upper floor shows three tall arches with thin dividing columns. A bigger print size and a layer height of 0.12-0.16 mm keep them crisp; Print friendly adapts the thinnest parts.
- Ribbed roof and side stairs
The roof is made of many narrow ridges, and stepped stairs climb the side. Full detail keeps all of this for a larger print, while slower printing helps tiny steps.
- One piece with the ground
Santa María del Naranco is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Santa María del Naranco takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Santa María del Naranco
Santa María del Naranco is a pre-Romanesque building from Asturias, on the slope of Mount Naranco in northern Spain, 3 kilometers (1.9 mi) from Oviedo. Ramiro I of Asturias commissioned it as a royal palace within a wider complex that included San Miguel de Lillo, a church 100 meters away. It was finished in 842, had a partly religious role, and was consecrated in 848. In the 12th century it was turned into a church for Saint Mary.
The palace has a rectangular ground plan and two floors. A low lower level holds a central chamber with one on each side. A double exterior stairway leads up to the same layout above: a central noble hall whose walls carry six blind semicircular arches, and a mirador at each end, each opened by three arches. The barrel vault is made of tufa stone and held up by six transverse arches that correspond with buttresses outside, which makes it a clear precursor of Romanesque construction.
Most of the rich decoration sits in the upper hall and miradors, including cubic-prismatic capitals of Byzantine influence and 32 medallions with animals, birds and bunches of grapes. A Greek cross appears as an emblem of the Asturian monarchy. The building was declared a Monumento Nacional on January 24, 1885, and UNESCO named it a World Heritage Site in December 1985.
About this model
Santa María del Naranco is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Same skyline


