A white 3D print of the Court Church, a long church with a steep roof and a slender octagonal tower, packed in among surrounding buildings with small green patches nearby.

3D print the Court Church

A free, printable model of the Court Church, with its steep roof and slender octagonal tower, and the tightly packed buildings around it, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Court Church model, North view North
  • Court Church model, East view East
  • Court Church model, South view South
  • Court Church model, West view West

© OpenStreetMap contributors

The model you print

Court Church in 3D

The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.

Drag to turn it. Scroll or pinch to zoom.

On a 160 mm print
15 mm
Scale
1:3,750

15 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Slender octagonal tower

    A thin octagonal tower with a lantern and cross rises beside the steep roof. Print friendly adapts it to the print scale; print slowly with good cooling, and use Full detail on larger prints.

  2. Arched band along the walls

    A row of small arches runs under the long roof. A bigger print and a layer height of 0.12-0.16 mm keep these shallow details crisp.

  3. One piece with the ground

    The Court Church is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Court Church takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About the Court Church

The Court Church, called the Hofkirche in German, is a Gothic church in the Altstadt (Old Town) of Innsbruck, Austria, at Universitätsstraße 2, next to the Hofburg. Emperor Ferdinand I built it in 1553 as a memorial for his grandfather, Emperor Maximilian I. Maximilian's will asked to be laid to rest in Wiener Neustadt's castle chapel, but building the large memorial he had planned in detail proved impractical there. His simple tomb stayed in Wiener Neustadt, so the Hofkirche serves as a cenotaph.

Architect Andrea Crivelli of Trento designed the church as a hall church, a traditional German form. Its three naves end in a setback, three-sided choir; the windows have round and pointed arches, and the roof is a steep broken hip. The layered buttresses reflect a compromise between contemporary Renaissance design and German late Gothic style. The stonemasons Anton de Bol and Hieronymus de Longhi carved the Renaissance portal. Inside, slender red marble colonnettes carry white stylized Corinthian capitals.

Maximilian's ornate black marble cenotaph fills the center of the nave, and building it took more than 80 years. Its sarcophagus was completed in 1572, and the kneeling emperor, four virtues and iron grille were added in 1584. Around it stand 28 large bronze statues of ancestors, relatives and heroes, made between 1502 and 1555. The church also has the Silver Chapel, consecrated in 1578, and a tomb for Andreas Hofer, Tyrol's national hero.

About this model

The Court Church is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Keep exploring

More landmarks to print

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits