3D print the Deelen Adelaerthoeve Hangar 11
A free, printable model of the Deelen Adelaerthoeve Hangar, a broad hangar under one huge hipped roof, with the surrounding grounds and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 5 mm
- Scale
- 1:3,750
5 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- One huge hipped roof
Most of the model is a single large hipped roof with a short ridge and a long western slope. Print friendly keeps its roof lights and small windows legible at small print sizes.
- Open aircraft entrance
The east end is a wide, open entrance with posts and braces behind it. A larger print helps that interior read; layers of 0.12–0.16 mm keep the slender posts crisp.
- One piece with the ground
The Deelen Adelaerthoeve Hangar 11 is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Deelen Adelaerthoeve Hangar 11 takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Deelen Adelaerthoeve Hangar 11
The Deelen Adelaerthoeve hangar, or Adelaerthoeve, is an aircraft hangar at Koningsweg 24B in Arnhem, Netherlands. It was built in 1941 during the Second World War as part of Fliegerhorst Deelen. The hangar was built as a Wärmehalle, a heated parking or workshop space.
The building follows the head-neck-body farmhouse model found in the north of the country. It is a national monument, restored and in 2022 repurposed as a boutique hotel, a tea room and a large space for public activities.
About this model
The Deelen Adelaerthoeve Hangar 11 is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
