3D print the Evans House
A free, printable model of the Evans House, a small house with a domed porch, and the taller buildings, streets and park nearby in Phoenix, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Evans House in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 3 mm
- Scale
- 1:3,750
3 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Onion dome on a small house
The domed porch is the smallest and most delicate part of this compact model. Print friendly adapts it to the print scale; Full detail keeps its shape, best with a larger print and a fine layer height.
- One piece with the ground
The Evans House is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Evans House takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Evans House
Doctor John M. Evans built the Evans House in 1893 in Phoenix, Arizona, at the northwest corner of Washington Street and Eleventh Avenue. The brick residence rises one and a half stories and has an unusual onion dome above its front entrance, springing from a semicircular porch at the front.
The ground floor holds seven rooms and served as a residence. The upper floor was Dr. Evans' office, and a separate exterior stairway led up to it. The Historic American Buildings Survey recorded the house, and its National Register of Historic Places listing dates from 1976.
About this model
The Evans House is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
