3D print EverBank Stadium
A free, printable model of the stadium bowl and the roads, buildings and fields around it, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About EverBank Stadium
EverBank Stadium is a football venue in Jacksonville, Florida, and the home field of the NFL's Jacksonville Jaguars. It sits beside the St. Johns River in downtown Jacksonville's Stadium District, an area where football fields have stood since early in the 20th century. The site covers 4.0 ha (10 acres). In 1995 it opened under the name Jacksonville Municipal Stadium, built where the older Gator Bowl Stadium had stood.
The new building reused some parts of the old one, namely its pedestrian ramp system and the West Upper Deck. Work began on January 3, 1994, and the first event was an exhibition game against the St. Louis Rams on August 18, 1995. Construction lasted less than 20 months in all.
The annual Florida–Georgia game, a college football rivalry between the University of Florida's Gators and the University of Georgia's Bulldogs, is regularly played here, and the annual Gator Bowl, a postseason game between college teams, is also played here. Super Bowl XXXIX was held here in 2005 and ended in a 24–21 win for the New England Patriots over the Philadelphia Eagles, with 78,125 in attendance. The stadium also serves for concerts and other events, and the U.S. men's national soccer team has used it as a venue.
How it prints
Make this print opens the generator on a 650 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 14 mm | 1:4,063 |
| 200 mm | 17 mm | 1:3,250 |
| 256 mm | 22 mm | 1:2,539 |
-
North
-
East
-
South
-
West
- A stack of narrow seating tiers
- The bowl is built from many thin, curving rows of seating. A bigger print keeps them as separate steps, and Print friendly adapts them to the print scale when the model is small.
- Slim poles around the rim
- Thin poles and frames stand at the corners and ends of the bowl. Printing slowly and using layers of 0.12 to 0.16 mm helps keep them clean.
- One piece with the ground
- EverBank Stadium is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. EverBank Stadium takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
EverBank Stadium is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there an EverBank Stadium STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. EverBank Stadium grows with the print: about 14 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
