3D print the Fry Building
A free, printable 3D model of the Fry Building, a low two-story corner building surrounded by streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 3 mm
- Scale
- 1:3,750
3 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Storefront awnings and arch
The recessed storefronts, segmental arch and slim pilasters are the smallest details. Use Full detail or a larger print so the arch and window heads stay readable.
- One piece with the ground
The Fry Building is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Fry Building takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Fry Building
The Fry Building, also called the Baxter Block, stands at 146 E. Washington St. in Phoenix. The two-story brick building dates to 1885 and is built in the Victorian Commercial style. It occupies the northwest corner at Washington and Second streets. It is the oldest commercial building still standing in Phoenix.
The city added the building to its historic register in April 1987. Majerle's Sports Grill dates its opening in the building to December 2, 1992, and its history notes that the landmark dates back to 1885. The building is also known as the Baxter Block.
About this model
The Fry Building is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
