3D print the Greece–Bosnia and Herzegovina Friendship Building
A free, printable model of Sarajevo's Greece–Bosnia and Herzegovina Friendship Building, an office slab with a white crown, among the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Greece–Bosnia and Herzegovina Friendship Building in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 80 m
- On a 160 mm print
- 25 mm
- Scale
- 1:3,750
80 m of the Greece–Bosnia and Herzegovina Friendship Building, 25 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Twin blades and a deep cleft
Each narrow end of the tower reads as two white blades split by a deep recessed slot. Print friendly adapts the thin end recesses and window ribbons; Full detail keeps them for a larger print or a fine nozzle.
- Ribbon floors and rooftop drum
Horizontal window ribbons run around the slab, and a round housing sits on the flat crown. Layers of 0.12 to 0.16 mm keep the ribbon edges and crown outline crisp.
- One piece with the ground
The Greece–Bosnia and Herzegovina Friendship Building is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Greece–Bosnia and Herzegovina Friendship Building takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Greece–Bosnia and Herzegovina Friendship Building
Greece–Bosnia and Herzegovina Friendship Building is a tall office building for the government in Sarajevo, Bosnia and Herzegovina. Bosnia and Herzegovina's Council of Ministers has its offices there. Because it stands next to the actual parliament building, a five-story structure, people often mistake the block for the Parliament Building. The two structures are adjacent.
It was finished in 1974, in the Yugoslav era, and the government of Bosnia and Herzegovina used it. It was first called the Executive Council Building and served as the principal government building of Bosnia and Herzegovina until Serb shelling badly damaged it in May 1992, in the first weeks of the Siege of Sarajevo. After the Bosnian War it stood gutted and empty until reconstruction began in 2006.
Greece supplied 80.4% of the money for the reconstruction, and the total cost reached €17,057,316. The Greek company Domotechniki SA finished the work in a little over a year. The building was inaugurated on July 23, 2007; Greek prime minister Kostas Karamanlis attended, along with the collective presidents of Bosnia.
About this model
The Greece–Bosnia and Herzegovina Friendship Building is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
