A white 3D print of Haapsalu Castle, a church-like building with a round conical-roofed tower, inside battlemented walls on a green hilltop with town streets and buildings around it.

3D print Haapsalu Castle

A free, printable model of Haapsalu Castle, with its cathedral, round tower and battlemented walls on a green hill above the surrounding streets and buildings, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Haapsalu Castle model, North view North
  • Haapsalu Castle model, East view East
  • Haapsalu Castle model, South view South
  • Haapsalu Castle model, West view West

© OpenStreetMap contributors

The model you print

Haapsalu Castle in 3D

The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.

Drag to turn it. Scroll or pinch to zoom.

Real height
29 m
On a 160 mm print
11 mm
Scale
1:3,750

29 m of Haapsalu Castle, 11 mm on your shelf

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Round tower and cathedral roof

    The round tower with its conical cap and the long ridge of the cathedral roof are the tallest parts. Print slowly with good cooling, and use a 0.12–0.16 mm layer height to keep their edges crisp.

  2. Thin battlemented walls

    Long crenellated walls circle the hilltop around the castle. Print friendly adapts the thin battlements to the print scale; Full detail keeps them, which suits a larger print size.

  3. One piece with the ground

    Haapsalu Castle is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Haapsalu Castle takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About Haapsalu Castle

Haapsalu Castle, in Estonia, has a cathedral within its walls and is also called the Bishop's Castle. Founded in the 13th century, it was the Bishopric of Ösel-Wiek's seat, and construction went on for three centuries. The stronghold reached its final size while Johannes IV Kievel (1515–1527) was bishop: more than 30,000 square meters in area, with walls 1.2 to 1.8 m (3.9 to 5.9 ft) thick and over 10 m (33 ft) high.

A 29 m (95 ft) watchtower from the 13th century stands on the west side. It was later used as a bell tower, and the walls were eventually raised to 15 m (49 ft). The Livonian War left the stronghold badly damaged. When Estonia came under Russian rule during the Great Northern War in 1710, Peter I of Russia ordered parts of the walls pulled down, which turned the castle in effect into ruins.

The castle's St. Nicholas Cathedral dates from 1260 and belongs to the transition from Romanesque to Gothic architecture. It is the biggest church with a single nave in the Baltic countries, with domical vaults 15.5 m (51 ft) high over an area of 425 m² (4,575 sq ft). Legend holds that on August full moon nights a maiden's image, the White Lady, appears on the chapel's inner wall.

About this model

Haapsalu Castle is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Keep exploring

More landmarks to print

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits