3D print St. John's Church, Tartu
A free, printable model of the church, with its tall tower and spire, and the closely packed buildings of Tartu around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
St. John's Church, Tartu in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 63 m
- On a 160 mm print
- 17 mm
- Scale
- 1:3,750
63 m of St. John's Church, Tartu, 17 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Tall slender spire
The pointed spire on the tower is the tallest, thinnest part of the model. Layers of 0.12 to 0.16 mm and slow printing help the tip stay crisp.
- Rows of narrow windows
Narrow pointed windows and fine ornament cover the tower and walls. Print friendly adapts them to the print scale; Full detail keeps every one, which suits a larger print.
- One piece with the ground
St. John's Church, Tartu is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. St. John's Church, Tartu takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About St. John's Church, Tartu
St. John's Church is a Brick Gothic Lutheran church, counted among the landmarks of Tartu in Estonia, and its dedication is to John the Baptist. The oldest parts of the present building come from the 14th century, when it was a Catholic church. A church has stood on the same site from the 13th century's first half at the latest, and archaeological investigations suggest a wooden church may have been here in the 12th century.
After the Great Northern War and again after World War II, the red brick building was largely rebuilt. Baroque chapels came in 1746 and 1769. The Great Fire of Tartu began near the church in 1775. The fire destroyed nearly two hundred houses but left the church and the nearby Uppsala House standing.
The church is known above all for the terracotta figurines around its exterior. There were originally more than a thousand, each made by hand and each different from the others, and about 200 have survived. One hypothesis holds that they were modeled after the citizens of Tartu, though some wear crowns, which hints that they depict someone else. The tower is 63 m high, and two bells named Peetrus and Paulus were added in 1999.
About this model
St. John's Church, Tartu is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Keep exploring





