A white 3D print of Halifax City Hall, a steep-roofed building with a central clock tower and dormer windows, facing a small park and surrounded by much taller buildings.

3D print Halifax City Hall

A free, printable model of Halifax City Hall, a steep-roofed building with a central clock tower and dormer windows, facing a small park among much taller buildings, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Halifax City Hall model, North view North
  • Halifax City Hall model, East view East
  • Halifax City Hall model, South view South
  • Halifax City Hall model, West view West

© OpenStreetMap contributors

The model you print

Halifax City Hall in 3D

The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.

Drag to turn it. Scroll or pinch to zoom.

On a 160 mm print
11 mm
Scale
1:3,750

11 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Dormers and clock tower

    Small dormers line the steep roof, and the clock tower ends in a pointed cap with a tiny finial. A layer height of 0.12–0.16 mm and a bigger print size keep these details crisp.

  2. Hemmed in by tall buildings

    Taller buildings crowd the hall, so some sides are hidden in the model. Full detail on a larger print keeps the arched windows and entrance on its south front.

  3. One piece with the ground

    Halifax City Hall is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Halifax City Hall takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About Halifax City Hall

Halifax City Hall is the seat of civic government for Halifax, in Nova Scotia, Canada. The building faces Duke Street at the northern end of Grand Parade, a historic military parade square that goes back to Halifax’s founding in 1749. Edward Elliot designed it, and it was built for the city between 1887 and 1890. It opened in 1890 for city business and public access, taking over from offices in the old courthouse on the waterfront.

The design is eclectic and monumental. The walls are cream and red sandstone worked in the freestone technique, while granite is used at ground level and for the tower. The tower has seven stories and clocks facing north and south. The north clock face stays fixed at four minutes past nine in memory of the Halifax Explosion of 1917. The hall ranks among Nova Scotia’s oldest and largest public buildings and also holds designation as a National Historic Site of Canada.

Dalhousie University’s building stood on this site in the nineteenth century, and it was torn down to clear the ground for City Hall; timbers from it are reported to have been reused in the new building. In 1896, six years after the opening, Harry Houdini escaped from the jail cells in the building. The Halifax Regional Municipality, newly created in 1996, made it its seat.

About this model

Halifax City Hall is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Same skyline

More landmarks in Halifax

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits