3D print the Hawke's Bay Airport Terminal
A free, printable model of the Hawke's Bay Airport Terminal, a terminal with arrowhead roof projections and a folded entrance canopy, with airport buildings around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 3 mm
- Scale
- 1:3,750
3 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Arrowhead roof tips
The roof's two shallow arrowhead projections end in thin unsupported tips. Print friendly adapts those tips to the print scale; Full detail and a larger print keep their shape.
- Folded entrance canopy
A folded fan canopy projects over the entrance on a single column. Print it larger, or at 0.12–0.16 mm layers, so the open underside and thin edge stay crisp.
- One piece with the ground
The Hawke's Bay Airport Terminal is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Hawke's Bay Airport Terminal takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Hawke's Bay Airport Terminal
The Hawke's Bay Airport Terminal stands at 111 Main North Road in Napier, New Zealand. A new terminal opened in August 2021 after delays caused by Covid-19, following an upgrade that added large extensions at the north and south ends of the existing building. The design was a collaboration between Mauvan Scott Architects and Designgroup Stapleton Elliot.
The terminal covers 4,340 m². Most of its facilities are on the ground floor, while the Regional Lounge of Air New Zealand sits on the first floor. The design takes inspiration from the kuaka, the bar-tailed godwit, in flight, and the building reached final completion in November 2021.
About this model
The Hawke's Bay Airport Terminal is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
