3D print Inuyama Castle
A free, printable model of Inuyama Castle's keep on its stone base and green hill above the river, generated from real map data in your browser.
-
North
-
East
-
South
-
West
© OpenStreetMap contributors · Terrain in Japan: 出典:国土地理院 (GSI elevation data via Mapterhorn)
The model you print
Inuyama Castle in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 7 mm
- Scale
- 1:3,750
7 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Layered curved roofs
The keep stacks several roofs with curved eaves and a small railed top story. Print friendly adapts the thin eave edges to the print scale; Full detail keeps them, best at larger sizes with 0.12–0.16 mm layers.
- One piece with the ground
Inuyama Castle is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Inuyama Castle takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Inuyama Castle
Inuyama Castle is a hirayama-style Japanese castle in Inuyama, in Aichi Prefecture. It sits on a hill above the Kiso River, which marks the boundary of Aichi and Gifu Prefectures. Its tenshu, or main tower, is one of just 12 surviving pre-modern tenshu and is considered one of the oldest, though Maruoka Castle makes a similar claim. The castle has held National Historic Site status since 2018.
The main tower is small, but its complex form gives it different silhouettes from different angles. The tenshu is designated a National Treasure of Japan, like those at Matsumoto, Hikone, Matsue and Himeji Castle. Of those five, it is the only one that lets visitors walk a full 360 degrees around the cornice. Tree rings in its timbers have dated the structure to the 1580s, and construction and renovations continued through 1620.
The layout comes mostly from Oda Nobukatsu, a son of Oda Nobunaga. After the Meiji government seized the castle in 1871, it destroyed every auxiliary building except the tenshu. In 1895 the castle went back to the Naruse family, who had to repair and maintain it in return, which made it unique in Japan as a privately owned castle. A foundation set up by Aichi Prefecture's Board of Education took ownership in 2004.
About this model
Inuyama Castle is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Keep exploring





