3D print Kaseya Center
A free, printable model of Kaseya Center with the water, parks, roads and buildings around it in Miami, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About Kaseya Center
Kaseya Center, a multi-purpose arena, sits on Biscayne Bay in Miami, Florida. Home to the Miami Heat, a National Basketball Association team, it opened on December 31, 1999, as American Airlines Arena, at a construction cost of $213 million, and Arquitectonica and 360 Architecture designed it. A concert by Gloria Estefan marked the opening, and the Heat played their first game there on January 2, 2000, beating the Orlando Magic 111–103.
The arena can hold 19,500 people, including 76 private boxes, 80 luxury suites and 2,105 club seats. Inside the complex is the Waterfront Theater, the biggest indoor theater in Florida, which seats from 3,000 to 5,800 patrons. The venue is known for an unusual scoreboard by the artist Christopher Janney, installed in 1998 during the original construction. It draws on underwater anemone forms and changes colors with the atmosphere.
The arena opened as American Airlines Arena, a name it kept from 1999 until 2021. FTX Arena followed from 2021 until 2023, and after FTX's bankruptcy it spent three months as Miami-Dade Arena. In April 2023, an agreement with the Miami-based software company Kaseya, running 17 years and worth $117.4 million, gave it the name Kaseya Center. It has hosted games in the NBA Finals of 2006, 2011, 2012, 2013, 2014 and 2023.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 14 mm | 1:3,750 |
| 200 mm | 17 mm | 1:3,000 |
| 256 mm | 22 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- A broad, smooth roof
- The roof is a wide, nearly flat disk with little detail. Thin layers of 0.12 to 0.16 mm give a smoother finish on large flat and gently curved surfaces.
- A glazed section on the wall
- One section of the curved wall carries fine vertical lines. Print friendly adapts them to the print scale, while Full detail keeps them; a bigger print size keeps more of the grid.
- One piece with the ground
- Kaseya Center is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Kaseya Center takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
Kaseya Center is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a Kaseya Center STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. Kaseya Center grows with the print: about 14 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
