3D print Kyocera Dome Osaka
A free, printable model of Kyocera Dome Osaka, its round domed roof and wavy roof ring, with the tall buildings, curved roads and water around it, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About Kyocera Dome Osaka
Kyocera Dome Osaka, officially called the Osaka Dome, is a baseball stadium in Osaka, Osaka Prefecture, Japan. It opened in 1997, and Nikken Sekkei designed it. When it opened it became home to the Osaka Kintetsu Buffaloes, who had earlier played at Fujiidera Stadium. The Orix Buffaloes, formed by the merger of the Orix BlueWave and the Osaka Kintetsu Buffaloes, made it one of their homes in 2005.
The Hanshin Tigers use the dome as their home field in two periods: season openers and August home games. Their own ground, Koshien Stadium, is in use then for high school baseball tournaments. The dome also hosted two mixed martial arts events from the Pride series, Total Elimination 2005 and Total Elimination Absolute. Kyocera Document Solutions, a subsidiary of Kyocera Corporation, began advertising at the dome in April 2003. The Osaka City Dome Company offered naming rights in January 2006, and Kyocera secured them on March 2, 2006. The contract was delayed until July 1 because of a reorganization of the Dome Company, and it was originally for five years.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 23 mm | 1:3,750 |
| 200 mm | 28 mm | 1:3,000 |
| 256 mm | 36 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- Wavy roof ring and panel lines
- A wavy roof ring surrounds the central dome, and both carry many panel lines. Layers of 0.12 to 0.16 mm keep the curves smooth, and a larger print keeps the panel lines readable.
- Slim ribs and open gaps
- The lower walls carry rows of slim ribs, with open gaps and ramps showing under the roof. Print friendly adapts thin parts like these to your print scale; Full detail keeps them.
- One piece with the ground
- Kyocera Dome Osaka is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Kyocera Dome Osaka takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
Kyocera Dome Osaka is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a Kyocera Dome Osaka STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. Kyocera Dome Osaka grows with the print: about 23 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
