3D print Laugardalsvöllur
A free, printable model of Laugardalsvöllur, with its two roofed stands facing each other across the field, and the green land and roads around it, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About Laugardalsvöllur
Laugardalsvöllur is the national football stadium of Iceland, located in Reykjavík, where the Iceland national football team plays its home matches. The name translates as 'Laugardalur Field' or, in a more exact rendering, 'Laugardalur Stadium'. The stadium consists of two big stands that face each other. The West Stand is the larger and main one, and it alone holds all the facilities the stadium needs apart from seating. An all-weather running track circles the pitch.
The idea of a sports venue in Laugardalur dates back to 1871, when Reykjavík had only about 2,000 residents. A committee called Laugardalsnefnd, formed by the town council in 1943, made proposals for the area, and its ideas included a new football stadium and a swimming pool. Work on the field began in 1949 and ended in 1952. The Iceland men's team played Norway there in 1957, and the official opening followed on June 17, 1959.
The stands changed over time. Construction of a new stand began in 1953, and it held 4,000 people when completed. Floodlights were inaugurated in 1992 for a match against Greece, and a new stand with a capacity of 3,500 was built across the pitch in 1997. The old stand was renovated and expanded between 2005 and 2007. The largest football crowd, 20,204, came to a 2004 friendly between Iceland and Italy, and on July 24, 2018, Guns N' Roses played to 25,000 people, then the largest rock concert held in Iceland.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 6 mm | 1:3,750 |
| 200 mm | 8 mm | 1:3,000 |
| 256 mm | 10 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- Thin roofs over open frames
- Each stand has a thin, sweeping roof over an open frame of supports. Print friendly adapts these parts to the print scale; Full detail keeps every frame member on a larger print.
- Two stands, one open field
- The stands face each other across a wide, flat field. Layers of 0.12–0.16 mm keep the stepped seating rows and roof edges crisp.
- One piece with the ground
- Laugardalsvöllur is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Laugardalsvöllur takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
Laugardalsvöllur is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a Laugardalsvöllur STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. Laugardalsvöllur grows with the print: about 6 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
