London Palladium in 3D
The London Palladium appears in city models you make here; its design may still be protected, so it isn't offered as a separate download.
-
North
-
East
-
South
-
West
Copyright notice
The design of London Palladium may still be protected by copyright. It appears in the city models you make here, but it is not offered as a separate model.
- On a 160 mm print
- 7 mm
- Scale
- 1:3,750
7 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- A low theater block
The theater is low in this model, so its outline and roofline carry the shape rather than any single detail. Print it larger if your plate allows, and use 0.12–0.16 mm layers for crisp edges.
- One piece with the ground
The London Palladium is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The London Palladium takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the London Palladium
The London Palladium is a Grade II* West End theater in Soho, on Argyll Street in London. Frank Matcham designed it, and it opened in 1910 with room for 2,286 people in the auditorium. Many stars, some of them on television, have appeared on its stage. From 1955 it was the setting for Sunday Night at the London Palladium, an ITV variety show; the October 13, 1963 edition featured the Beatles, and newspaper headlines in the days that followed coined the term "Beatlemania".
The front dates from the 19th century and stands where Argyll House once was. Before the theater the plot held the Corinthian Bazaar, a temporary wooden building with an aviary, then a circus arena run by Fredrick Hengler, where the bill included pantomimes, promenade concerts and an aquatic display in a ring flooded with water, and then the National Skating Palace, a rink with real ice. When the rink failed, Matcham redesigned the building on the site of Hengler's Circus. Inside, a telephone system let the occupants of boxes call one another, and the stage revolved.
The Palladium stages resident shows and one-off performances, from concerts and television specials to Christmas pantomimes, and the Royal Variety Performance has been staged there 43 times. On May 11, 1941, an unexploded German parachute mine came through the roof and lodged above the stage; the mine did not detonate, a Royal Navy disposal team took out the fuse, and Sub Lieutenant Graham Maurice Wright was awarded the George Medal for his part in it. The Grade II* listing came in September 1960.
About this model
The London Palladium is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Same skyline





