3D print Mortgage Matchup Center
A free, printable model of the arena and the downtown streets and buildings around it, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About Mortgage Matchup Center
Phoenix, Arizona, is home to Mortgage Matchup Center, a multi-use arena. It opened on June 6, 1992, under the name America West Arena, at a cost of $89 million. Its names have included Footprint Center, US Airways Center, PHX Arena, Talking Stick Resort Arena and Phoenix Suns Arena. It stands one block from Chase Field, where the Arizona Diamondbacks play. The arena covers 93,000 m2 (1 million square feet) on a site of 4.5 ha (11 acres).
The Phoenix Suns (NBA) and Phoenix Mercury (WNBA) call it home, and it was formerly home to the Arizona Rattlers of the Indoor Football League. The Phoenix Coyotes of the NHL played their first seven seasons there after arriving in Phoenix on July 1, 1996, and won their first regular season home game, 4–1 over the San Jose Sharks, on October 10, 1996. The Purple Palace is its most common nickname, and in the Rattlers' season it was known as The Snake Pit.
The Suns faced the Chicago Bulls in the 1993 NBA Finals, and three of those games came to the arena in its inaugural season. Later the Suns hosted the Milwaukee Bucks for three games in the 2021 NBA Finals. The NBA All-Star Game was played there in 1995 and 2009. Of four ArenaBowl games hosted by the Rattlers, three were played at the arena, and Frank Sinatra performed one of his final concerts there on December 10, 1993.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 9 mm | 1:3,750 |
| 200 mm | 12 mm | 1:3,000 |
| 256 mm | 15 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- A broad, nearly flat roof
- The octagonal roof is wide and low. Print slowly with layers of 0.12 to 0.16 mm to keep the top surface and its sloped edges clean.
- Curved wing with thin fins
- A curved wing with thin vertical fins sits at one corner of the arena. Print friendly adapts these thin parts to the print scale; Full detail keeps more of their shape on a larger print.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Mortgage Matchup Center takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
Mortgage Matchup Center is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a Mortgage Matchup Center STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. Mortgage Matchup Center grows with the print: about 9 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
