3D print the Moshe Aviv Tower
A free, printable model of the Moshe Aviv Tower, with its round crown and tall shaft among the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Moshe Aviv Tower in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 235 m
- On a 160 mm print
- 63 mm
- Scale
- 1:3,750
235 m of the Moshe Aviv Tower, 63 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Slender tower with a round crown
A tall slim shaft carries a round crown with a ring around its edge. Print friendly adapts the thin crown details to your print scale; print slowly so the tall tower stays steady.
- Fine vertical ribs
The tower's sides show long vertical ribs and rows of small openings. A layer height of 0.12–0.16 mm keeps them crisp, and a bigger print keeps more of them.
- One piece with the ground
The Moshe Aviv Tower is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Moshe Aviv Tower takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Moshe Aviv Tower
The Moshe Aviv Tower is a skyscraper of 68 stories that reaches 235 meters (771 ft). It stands on Jabotinsky Road in Ramat Gan, Israel, within the Diamond Exchange District. Its original name was City Gate, and it is commonly known by that name. Architects Amnon Niv and Amnon Schwartz designed it, taking inspiration from the Westend Tower in Frankfurt. The owner of the construction company, Moshe Aviv, died in October 2001 in an accident, before the building was finished, and the tower was named after him.
Building work started in 1998, and by 2003 the tower was finished and occupied. The pace was extremely quick, at five stories per month with a single shift of only 40 workers. Concrete placement ran at 3,000 m3 a month. The total cost was US$133 million, and on completion it was Israel's most expensive single building. Altogether the tower provides 180,000 m2 of space.
The tower mixes uses. The top 11 floors hold 98 apartments across 17,000 m2 of residential space, while the bulk of the tower below contains 63,000 m2 of offices. Residential and office sections have separate lobbies and elevators. An emergency helipad sits on the roof of the cylindrical section.
About this model
The Moshe Aviv Tower is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
