3D print Optus Stadium
A free, printable model of Optus Stadium, a round stadium with a ribbed roof ring, beside parkland and water, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About Optus Stadium
Perth Stadium, which carries the name Optus Stadium under naming rights, is a stadium located in Burswood, a suburb of Perth. It is used mainly for Australian rules football and cricket. The West Coast Eagles, along with the Fremantle Football Club, play their home games there in the Australian Football League, as do the Perth Scorchers of the Big Bash League. A consortium led by Multiplex built it.
The Burswood location was announced in June 2011, following earlier proposals that included sites in Subiaco and East Perth. The stadium was completed in late 2017 and officially opened on January 21, 2018. Capacity reaches 61,266 with standing room included, and for rectangular sports the seating can rise to 65,000. Only Stadium Australia and the Melbourne Cricket Ground are larger among Australian stadiums.
Burswood was favored because no surrounding developments constrained it, and the land was already in government hands. At the time of the announcement, the plans for the site included a special-events railway station and a footbridge over the Swan River to East Perth. No car park was built for the stadium; visitors were expected to leave cars in the city and cross the bridge on foot, or use public transport. The land lies on the Burswood Peninsula, once called the Swan Portland Cement Site.
How it prints
Make this print opens the generator on a 650 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 11 mm | 1:4,063 |
| 200 mm | 14 mm | 1:3,250 |
| 256 mm | 17 mm | 1:2,539 |
-
North
-
East
-
South
-
West
- A roof ring of fine ribs
- The roof ring is made of many narrow radial ribs. Print friendly adapts them to the print scale; Full detail keeps every rib on a larger print, and 0.12–0.16 mm layers keep them crisp.
- Diagonal struts around the outside
- Slim diagonal struts run around the outer wall below the roof. A bigger print size makes them sturdier, and printing slowly helps them come out cleanly.
- One piece with the ground
- Optus Stadium is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Optus Stadium takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
Optus Stadium is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there an Optus Stadium STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. Optus Stadium grows with the print: about 11 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
