3D print Fremantle Town Hall
A free, printable model of Fremantle Town Hall and the larger buildings and streets around it, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About Fremantle Town Hall
Fremantle Town Hall stands in Western Australia's port city of Fremantle, at the corner where High, William and Adelaide Streets meet. The official opening, on June 22, 1887, was timed with Queen Victoria's Jubilee celebrations, and the state governor, Frederick Broome, and the mayor, Daniel Keen Congdon, formally named it the Town and Jubilee Hall.
A town hall was first suggested in 1876, but plans did not go ahead because funding could not be met. In April 1881 the council's chairman proposed a building costing no more than £8000, and John Grainger and Charles D'Ebro, architects from Melbourne, took over the design. The same pair were behind the National Bank in Fremantle. Building began on May 28, 1885, and Governor Frederick Napier Broome laid the foundation stone on September 10, 1885. The opening was delayed by seven months to coincide with the Jubilee. A day of sports and an evening ball came after the ceremony.
Griffiths and Considine, local architects acting for the Melbourne designers, described the building as a self-assured Victorian free-style take on classical architecture. Its facades use pediments, a rusticated floor, Corinthian pilasters, urns and string courses, all rendered to look like stone. At roof level, classicism is replaced by an exuberant array of towers.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 7 mm | 1:3,750 |
| 200 mm | 9 mm | 1:3,000 |
| 256 mm | 11 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- Small gables on the roof
- Small gabled pavilions rise from the hipped roof at the corners. Print friendly adapts these small details to the print scale; Full detail keeps them, which suits a larger print.
- Rows of ornate windows
- Rows of windows with raised surrounds break up the walls. Layers of 0.12 to 0.16 mm keep them crisp, and a larger print size keeps more of that detail.
- One piece with the ground
- Fremantle Town Hall is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Fremantle Town Hall takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
Fremantle Town Hall is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a Fremantle Town Hall STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. Fremantle Town Hall grows with the print: about 7 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
