3D print Orient House
A free, printable model of Orient House in Jerusalem, with the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Orient House in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 3 mm
- Scale
- 1:3,750
3 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Ornate entrance and railings
The front has a decorated entrance with a double stair and fine railings under a hipped roof. A larger print keeps those details readable; Print friendly adapts the thinnest parts at small sizes.
- One piece with the ground
Orient House is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Orient House takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Orient House
In Jerusalem stands Orient House, once the Palestine Liberation Organization's (PLO's) headquarters, during the 1980s and 1990s. Ismail Musa Al-Husseini built it in 1897, and the Al-Husseini family has owned it ever since. It was meant as a family home, but at times it was vacated for important guests, among them the German Kaiser, Wilhelm II, in 1898 and Haile Selassie, the Ethiopian emperor, in 1936.
During the 1948 Arab–Israeli War the house lay on the eastern side of the ceasefire line, in territory controlled by Jordan. From 1948 to 1950 it held the headquarters of UNRWA, the United Nations agency for Palestine refugees, and two years after that its owner converted it into a luxury hotel, "The New Orient House". After the 1967 Six-Day War the hotel shut and the building was left largely neglected; in 1968, some of the first residents of the Kiryat Itri neighborhood were lodged there temporarily.
In 1983 Faisal Husseini led the Arab Scientific Association, which was affiliated with the PLO, when it rented a section of the house. Israel closed it in 1988 and banned PLO activity there, and it was renewed after four more years, in 1992, with Husseini renting and renovating it. The jazz musician Gilad Atzmon took the name of his band, The Orient House Ensemble, from the building.
About this model
Orient House is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
