3D print Petco Park
A free, printable model of Petco Park and the city buildings and streets that crowd around it, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About Petco Park
Petco Park, a ballpark, stands in downtown San Diego, California, in the East Village neighborhood next to the Gaslamp Quarter. It is where the San Diego Padres, a Major League Baseball (MLB) team, play their home games. It opened in 2004 and replaced San Diego Stadium, the team's home from its start in 1969 until 2003. The San Diego Convention Center lies across Harbor Drive from it.
More than $450 million was spent on construction, with partial funding from a public–private partnership. The project was meant to support a broad plan for reviving the city's aging downtown, with East Village the main focus. Work paused for a time over legal and political issues, delaying an opening that had been scheduled for the 2002 season. Another holdup came from a historic warehouse, the Western Metal Supply Co. building. Following talks with preservationists, the builders agreed to rehabilitate it, and it was renovated and made part of the stadium design, an example of adaptive reuse. Its southeast corner doubles as the left field foul pole.
The Padres played their first game there on April 8, 2004, winning 4–3 against the San Francisco Giants, in ten innings. The ballpark staged the 2006 championship of the first World Baseball Classic and the MLB All-Star Game of 2016. Gallagher Square, beyond the outfield wall, has a community park plus a viewing terrace that the public can visit during the stadium's off-hours.
How it prints
Make this print opens the generator on a 650 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 15 mm | 1:4,063 |
| 200 mm | 19 mm | 1:3,250 |
| 256 mm | 24 mm | 1:2,539 |
-
North
-
East
-
South
-
West
- Slim light towers on the rim
- Tall, thin light towers rise above the edge of the stands. Print friendly adapts them to the print scale; Full detail keeps them on a larger print, ideally printed slowly with good cooling.
- Stepped tiers around the field
- Many shallow seating tiers sweep around the field. Layer heights of 0.12–0.16 mm keep the tier edges crisp, and a bigger print size keeps them distinct.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Petco Park takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
Petco Park is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a Petco Park STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. Petco Park grows with the print: about 15 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
