3D print Phoenix Municipal Stadium
A free, printable model of Phoenix Municipal Stadium, an L-shaped grandstand curving around an open green field, with roads and park land around it, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About Phoenix Municipal Stadium
Phoenix Municipal Stadium, often called Phoenix Muni, is a baseball stadium in Phoenix, Arizona. The ballpark dates from 1964 and has room for 8,775 spectators. Baseball for Arizona State, the Sun Devils, has been played there from the start of the 2015 season. Spring training brought the San Francisco Giants in the years 1964 to 1981, and the Oakland A's trained there from 1982 until 2014.
On June 4, 1962, the Phoenix city council approved a new stadium in Papago Park to replace the old one. The plans included six water fountains, because they had been left out of the then-new Dodger Stadium. Construction was delayed, and the council approved the project again on April 23, 1963, with a budget of $605,300. On March 8, 1964, the first spring training game took place, and the Giants beat Cleveland 6 to 2. Willie Mays hit the park's first home run, with 8,582 fans watching.
The earlier Phoenix Municipal Stadium opened in 1936 at Central and Mohave streets, with seats for around 3,000 spectators. The New York Giants began spring training there in 1947 and stayed until 1963. That stadium was later renamed Central Stadium and torn down in October 1969. In the new stadium, a "welcome home" rally on October 31, 1964 for the presidential candidate Barry Goldwater was the first time it was filled to capacity.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 5 mm | 1:3,750 |
| 200 mm | 6 mm | 1:3,000 |
| 256 mm | 7 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- Long, thin grandstands
- The stands are long, narrow bands of stepped seating rows. A larger print size and 0.12 to 0.16 mm layers keep the rows distinct.
- Open ground around the stands
- The stands curve around open grass rather than a closed bowl. Print friendly keeps the thinnest edges printable at small sizes.
- One piece with the ground
- Phoenix Municipal Stadium is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Phoenix Municipal Stadium takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
Phoenix Municipal Stadium is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a Phoenix Municipal Stadium STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. Phoenix Municipal Stadium grows with the print: about 5 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
