A white 3D print of Porta Macedonia, a triumphal arch with columns, relief panels and small figures at the corners, beside roads and surrounding buildings.

Porta Macedonia in 3D

Porta Macedonia appears in city models you make here; its design may still be protected, so it isn't offered as a separate download.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Porta Macedonia model, North view North
  • Porta Macedonia model, East view East
  • Porta Macedonia model, South view South
  • Porta Macedonia model, West view West

© OpenStreetMap contributors

Copyright notice

The design of Porta Macedonia may still be protected by copyright. It appears in the city models you make here, but it is not offered as a separate model.

Real height
21 m
On a 160 mm print
7 mm
Scale
1:3,750

21 m of Porta Macedonia, 7 mm on your shelf

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Columns and relief panels

    The arch is crowded with slim columns and shallow relief panels. Because the model is small, a larger print size and 0.12-0.16 mm layers keep these details readable.

  2. Tiny figures on the corners

    Small figures stand at the top corners of the arch. Full detail keeps them; Print friendly adapts them to the print scale if you print small.

  3. One piece with the ground

    Porta Macedonia is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Porta Macedonia takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About Porta Macedonia

Porta Macedonia is a memorial arch in North Macedonia, on Pella Square in Skopje. Work began in 2011 and finished in January 2012. The monument rises 21 meters and cost EUR 4.4 million. It was created by the sculptor Valentina Stevanovska, who also made other controversial monuments in the Skopje 2014 project.

The arch marks 20 years of Macedonian independence. Its outer surface carries 193 m2 of marble reliefs showing scenes from North Macedonia's past. Inside there are rooms, one used as a state-owned souvenir shop, plus elevators and stairs that give the public access to the roof.

The arch drew criticism for its high cost. It was meant to pair with the statue of Alexander the Great, nearly as tall, that went up in the central square of the capital in summer 2011, and both belonged to the government-funded Skopje 2014 project. Greece's Foreign Ministry filed an official complaint in 2012, after the arch was inaugurated; among the historical figures shown on it is Alexander the Great.

About this model

Porta Macedonia is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Same skyline

More landmarks in Skopje

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits