3D print the Sultan Murad Mosque
A free, printable model of the Sultan Murad Mosque, with its single slender minaret, arcaded porch and pyramid-shaped roof, set among low buildings and streets, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Sultan Murad Mosque in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 12 mm
- Scale
- 1:3,750
12 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- A slender minaret
The single tall, narrow minaret with its small balcony is the most fragile part. Print larger or choose Full detail to keep it, and print slowly with good cooling for the thin tip.
- Arches and the small dome
The arcaded porch and the small domed annex carry fine arches. A layer height of 0.12-0.16 mm keeps the curves smooth; Print friendly adapts them at small sizes.
- One piece with the ground
The Sultan Murad Mosque is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Sultan Murad Mosque takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Sultan Murad Mosque
The Sultan Murad Mosque dates from the Ottoman period and stands in Skopje, North Macedonia. Money donated by Sultan Murad paid for it, and it was built in 1436 on the site of Saint George's Monastery, which had been destroyed in 1392 when Pasha Yiğit Bey, an Ottoman commander, captured Skopje from Vuk Branković. The complex is Skopje's only Sultan endowment and sits on a low hill within the Old Bazaar. Husein from Debar was its main architect.
Fire and damage struck the mosque repeatedly, and three inscriptions over the entrance refer to these events and the changes that followed. After the first fire, in 1537, Sultan Suleyman had it reconstructed in 1539. Later the Austrian armies under Piccolomini burned the whole city, and the mosque with it, and it was renewed twenty three years afterward, in 1711, by order of Ahmed III. Mehmed V decreed the most recent repairs, carried out in 1912.
It is among the largest mosques in Skopje and ranks among the most significant examples of Ottoman building in the Balkans. Its basilica layout and four-ridged roof resemble the Early Constantinople style of Ottoman architecture. The interior has three naves separated by rows of three columns, beneath a flat coffered ceiling made of wood. The building is rectangular, with a porch of four columns with decorated capitals joined by arcades. Two türbes stand beside it, one to the east and one to the south.
About this model
The Sultan Murad Mosque is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Same skyline



