A white 3D print of the Radcliffe Camera, a round domed building with a small lantern on top, surrounded by lawn, paths and neighboring buildings.

3D print the Radcliffe Camera

A free, printable model of the Radcliffe Camera, a round domed building surrounded by lawn and the neighboring buildings, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Radcliffe Camera model, North view North
  • Radcliffe Camera model, East view East
  • Radcliffe Camera model, South view South
  • Radcliffe Camera model, West view West

© OpenStreetMap contributors

The model you print

Radcliffe Camera in 3D

The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.

Drag to turn it. Scroll or pinch to zoom.

On a 160 mm print
12 mm
Scale
1:3,750

12 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Dome, lantern and balustrade

    The ribbed dome carries a small lantern, and a railing with tiny finials circles the roofline below it. Print friendly adapts these small parts; use a layer height of 0.12–0.16 mm to keep the dome ribs crisp.

  2. One piece with the ground

    The Radcliffe Camera is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  3. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  4. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Radcliffe Camera takes the building color.

  5. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About the Radcliffe Camera

James Gibbs designed the Radcliffe Camera, a University of Oxford building in the Baroque style, constructed between 1737 and 1749. It was built as a library and later became a Bodleian Library reading room that is not open to the public. The name comes from the Latin word for chamber, and people also call it the Rad Cam or the Camera.

The Old Bodleian lies to its north and St Mary the Virgin church to its south, with Brasenose College on the west side and All Souls College on the east. Because it is round, central and set apart from its neighbors, it is the focal point of the whole university, and it is almost always part of shorthand visual representations of Oxford.

John Radcliffe, a physician, left £40,000 when he died in 1714, and his estate paid for the library's construction and upkeep. The library could not open until 1749. A tunnel links the building to the Bodleian, and an underground book store lies beneath it.

About this model

The Radcliffe Camera is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Same skyline

More landmarks in Oxford

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits