3D print the RAF Rougham control tower

3 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

1. Rooftop cabin and rails

   A small glazed control cabin sits back on the flat roof, ringed by an open railed terrace. Print friendly adapts the thin rails and frames; Full detail keeps the glazing facets on a larger print.

2. Balcony and open stairs

   An open balcony and two stair flights project from the facade on slender supports. Use 0.12–0.16 mm layers and print slowly so the rails and treads stay crisp.

3. One piece with the ground

   The RAF Rougham control tower is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

4. Pick the detail for your nozzle

   In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

5. Colors

   Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The RAF Rougham control tower takes the building color.

6. File format

   You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.