3D print the Ritz-Carlton Toronto
A free, printable model of the Ritz-Carlton Toronto and the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Ritz-Carlton Toronto in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 210 m
- On a 160 mm print
- 57 mm
- Scale
- 1:3,750
210 m of the Ritz-Carlton Toronto, 57 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Print the tower slowly
A tall, narrow tower is the part most likely to wobble while printing. Slow the print down, allow good cooling, and try a layer height of 0.12–0.16 mm for crisp edges.
- One piece with the ground
The Ritz-Carlton Toronto is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Ritz-Carlton Toronto takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Ritz-Carlton Toronto
The Ritz-Carlton Toronto combines a luxury hotel with residential condominiums in a single building at 181 Wellington Street West, Toronto, Ontario. The site lies where downtown ends on the west, bordering Toronto's entertainment district, and it opened on February 16, 2011. Rising 209.8 meters (688 ft), the 53-story tower ranks among Toronto's tallest buildings, and Wikidata lists Kohn Pedersen Fox as its architect.
The exterior is an outwardly sloped neomodern glass facade, which gives the tower a distinctive profile on the city's skyline. Inside are 263 hotel rooms and 159 condominiums managed by Ritz-Carlton. Hotel space fills the lower 20 floors, while floors 21 and 22 hold condominium amenities and some residences. Floors 23 to 52 contain the rest of the residences. The penthouse suite takes up the whole 52nd floor, and the 53rd floor houses mechanical equipment. The tower also includes a spa of 2,100 square meters (23,000 sq ft).
About this model
The Ritz-Carlton Toronto is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
