3D print San Giovanni in Bragora
A free, printable model of San Giovanni in Bragora and the tightly packed Venice buildings and streets around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
San Giovanni in Bragora in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 4 mm
- Scale
- 1:3,750
4 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Narrow gabled nave
The model is a long, steep-roofed nave squeezed between neighbors, so most detail is on the front. A larger print and 0.12–0.16 mm layers keep the façade's portals and rose window crisp.
- Small details on the roofline
A small gabled piece and thin edges rise above the roofline. Print friendly adapts them to the print scale; Full detail keeps them on larger prints.
- One piece with the ground
San Giovanni in Bragora is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. San Giovanni in Bragora takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About San Giovanni in Bragora
San Giovanni in Bragora stands in the Castello sestiere of Venice, Italy. Its foundation dates to the early 8th century and is attributed, allegedly, to St. Magnus of Oderzo. Rebuilding came in the next century under doge Pietro III Candiano, meant to hold the reputed relics of St. John the Baptist, its dedicatee, and the church was rebuilt again in 1178.
Its present look comes from the last renovation, between 1475 and 1505. That work kept the basilica plan and added a brickwork façade in the local late-Gothic style, divided into three sections. Inside are works by Cima da Conegliano, including a Baptism of Christ from 1492, and by Alvise Vivarini, under a trussed ceiling.
Pietro Barbo, the future Pope Paul II, and the composer Antonio Vivaldi were both baptized in the church. Vivaldi was baptized in 1678, and his family is thought to have lived close by. Relics of John the Merciful are kept there too. The origin of the name Bragora is unclear; it may come from the Greek agorà (square), from a dialect word for market, or from brago, meaning mud.
About this model
San Giovanni in Bragora is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Same skyline





