A white 3D print of the Scott Monument, a tall Gothic tower with open arches, pinnacles and a slender spire, beside a road and large buildings.

3D print the Scott Monument

A free, printable model of the Scott Monument, its slender spire rising above the gardens, with the nearby streets and buildings, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Scott Monument model, North view North
  • Scott Monument model, East view East
  • Scott Monument model, South view South
  • Scott Monument model, West view West

© OpenStreetMap contributors

The model you print

Scott Monument in 3D

The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.

Drag to turn it. Scroll or pinch to zoom.

Real height
61 m
On a 160 mm print
17 mm
Scale
1:3,750

61 m of the Scott Monument, 17 mm on your shelf

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Slender spire and pinnacles

    The tower narrows into a thin spire with many small pinnacles and open arches. Print friendly adapts the fine tip to the print scale; Full detail keeps every pinnacle, which suits a larger print. Print slowly with good cooling for the top.

  2. One piece with the ground

    The Scott Monument is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  3. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  4. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Scott Monument takes the building color.

  5. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About the Scott Monument

Sir Walter Scott, the Scottish author, is commemorated by the Scott Monument, a Victorian Gothic tower. Only the monument to José Martí in Havana is larger among monuments to a writer, making it the world's second-largest. Its site is Princes Street Gardens in Edinburgh, facing the former Jenners building, near Waverley station, a name that comes from Scott's Waverley novels.

Rising 61.11 m (200 feet 6 inches), the tower has viewing platforms reached by spiral staircases, with panoramic views of central Edinburgh. Climbing to the top platform takes 287 steps. Its stone is Binny sandstone, taken from a quarry near Ecclesmachan in West Lothian. A statue by John Steell, made from white Carrara marble, shows Scott seated with his dog Maida, and the monument is decorated with 64 figures depicting characters in his novels.

Scott died in 1832, and a competition for a monument to him followed. George Meikle Kemp, a joiner, draughtsman and self-taught architect, entered under the pseudonym "John Morvo" and was awarded the contract in 1838. The foundation stone was laid on August 15, 1840, and construction ran for nearly four years, at a total cost of just over £16,154. Kemp drowned on March 6, 1844, and the monument was inaugurated on August 15, 1846.

About this model

The Scott Monument is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Same skyline

More landmarks in Edinburgh

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits