3D print the Sharon Temple
A free, printable 3D model of the Sharon Temple and its surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Sharon Temple in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 21 m
- On a 160 mm print
- 6 mm
- Scale
- 1:3,750
21 m of the Sharon Temple, 6 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Tiered roofs and small details
A tiered building keeps its roof details better at a larger print size. Print friendly adapts thin parts to the scale; Full detail suits a large print or a fine nozzle.
- One piece with the ground
The Sharon Temple is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Sharon Temple takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Sharon Temple
In the village of Sharon, Ontario, the Sharon Temple forms an open-air museum site designated a National Historic Site of Canada. Eight heritage buildings and dwellings stand on its 1.8 ha of grounds, which hold 6,000 artifacts. A sect called the Children of Peace, led by the former Quaker David Willson, built the temple from 1825 to 1832 on Willson's own property. Ebenezer Doan, the master builder, served as the architect-contractor responsible for designing and building it.
The temple is square, unlike Quaker meeting houses. It is more than seventy feet (21 m) high, in three stories that diminish in size to represent the Trinity. A door sits in the center of each of the four sides. Ornate lanterns sit at each roof corner of every story, each capped with four golden spires, and a golden globe hangs at the apex. Inside, an ark holds a bible opened at the ten commandments, surrounded by four pillars named Faith, Hope, Love and Charity.
Willson died in 1866, after which the sect slowly shrank, and the temple saw its last service in 1889. The York Pioneer and Historical Society bought the temple, with its grounds, in 1917 and opened it as a museum the next year, in 1918. That purchase is among Canada's earliest examples of historic preservation. The building is made available for tours, concerts, weddings and special occasions.
About this model
The Sharon Temple is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
