A white 3D print of St. George's Church, a timber church with three domed towers and an arcaded base, standing on open ground among a few houses.

3D print St. George's Church, Drohobych

A free, printable model of St. George's Church and the open ground, paths and houses around it in Drohobych, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • St. George's Church, Drohobych model, North view North
  • St. George's Church, Drohobych model, East view East
  • St. George's Church, Drohobych model, South view South
  • St. George's Church, Drohobych model, West view West

© OpenStreetMap contributors

The model you print

St. George's Church, Drohobych in 3D

The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.

Drag to turn it. Scroll or pinch to zoom.

On a 160 mm print
6 mm
Scale
1:3,750

6 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Domes, cupolas and crosses

    Three domed towers carry small cupolas and thin crosses, above a low arcade around the base. Print slowly with cooling at 0.12–0.16 mm layers, and use Full detail on larger prints to keep the crosses.

  2. One piece with the ground

    St. George's Church, Drohobych is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  3. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  4. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. St. George's Church, Drohobych takes the building color.

  5. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About St. George's Church, Drohobych

St. George's Church in Drohobych counts among Galicia's oldest timber churches and is also one of the best preserved. It is a monument of the region's wooden architecture from the late 15th and early 16th centuries, regarded as one of the best of ancient Ukrainian sacral architecture. The church forms part of the Museum of Drohobych region, in its wooden architecture department.

The church was built in the 15th century and has been rebuilt several times. The Ukrainian architect Hryhoriy Tesla, from Drohobych, gave it its final architectural form. It has three parts: a square central block holding the nave, and two further blocks containing the double apse and the narthex.

The church was renovated in the years 1678 to 1711: frescoes covered the interior, the octagonal structures were raised higher and a new belfry was added. It is one of 16 churches that together form a UNESCO World Heritage Site called Wooden Tserkvas of the Carpathian Region.

About this model

St. George's Church, Drohobych is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Keep exploring

More landmarks to print

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits