3D print the St Mark's Clocktower
A free, printable model of St Mark's Clocktower and the buildings beside it on Piazza San Marco, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
St Mark's Clocktower in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 8 mm
- Scale
- 1:3,750
8 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Small details on the roof terraces
The tower top has balustraded terraces and a small cross-topped spire that sit among much taller neighbors. Print friendly adapts them to the print scale; Full detail keeps them, best with a larger print and 0.12–0.16 mm layers.
- One piece with the ground
The St Mark's Clocktower is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The St Mark's Clocktower takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the St Mark's Clocktower
The Clock Tower is an early Renaissance building in Venice, set on the north side of Piazza San Marco where the Merceria begins. It consists of a central tower with the clock and a lower building on either side, and it joins the east end of the Procuratie Vecchie. The two lower floors form a monumental archway into the Merceria, the street that linked the political and religious center of the city with its commercial and financial center at the Rialto.
The Senate commissioned a new clock in 1493, and in 1495 it decided on a tower to hold it. Building started in 1496, and the tower itself went up in 1496 and 1497. Its design is usually credited to Mauro Codussi, based on style rather than documents. The tower and clock were inaugurated on February 1, 1499. The wings on either side were added by 1506.
On the terrace at the top, two large bronze figures, hinged at the waist, strike the hours on a bell. Because the bronze has darkened, they are called the Moors. Simeone Campanato signed the bell, which he cast at the Arsenal in 1497. Below it are the winged Lion of Saint Mark and a gallery with a gilt copper Virgin and Child, above a blue and gold clock face with the signs of the zodiac.
About this model
The St Mark's Clocktower is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Same skyline





