3D print St. Michael's Cathedral Basilica
A free, printable 3D model of St. Michael's Cathedral Basilica and its surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
St. Michael's Cathedral Basilica in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 79 m
- On a 160 mm print
- 21 mm
- Scale
- 1:3,750
79 m of St. Michael's Cathedral Basilica, 21 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Tower and spire
Towers and spires are the thinnest parts of a Gothic-style church. Print friendly adapts them to the print scale; printing slowly with layers of 0.12–0.16 mm keeps them crisp.
- One piece with the ground
St. Michael's Cathedral Basilica is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. St. Michael's Cathedral Basilica takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About St. Michael's Cathedral Basilica
St. Michael's Cathedral Basilica serves as the cathedral for the Roman Catholic Archdiocese of Toronto in Canada, and it ranks among the city's oldest churches. It is in Toronto's Garden District, at 65 Bond Street. William Thomas designed it, and Irish immigrants living nearby paid for most of it. Described as a prime example of English Gothic Revival, it was elevated to a minor basilica on September 29, 2016.
Construction began on April 7, 1845, and the cornerstone was laid on May 8, 1845. Fragments of stone and oak from York Minster in England were sealed inside it. It received its dedication on August 29, 1848, and its consecration a month later. The tower and spire were completed by Gundry & Langley from 1865 to 1867.
The exterior is cream-colored brick with stone accents and teal shingles. An iron spire tops the tower over the west entrance, which reaches 260 feet (79 m), about 26 stories above the ground. The design is simplified compared with Gothic cathedrals of the 13th or 14th century, without flying buttresses, transepts or ribbed vaults, and it can hold 1600 people.
About this model
St. Michael's Cathedral Basilica is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
