3D print St. Peter, Zurich
A free, printable model of St. Peter, with its tall clock tower and spire, among the packed buildings of Zurich, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
St. Peter, Zurich in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 64 m
- On a 160 mm print
- 19 mm
- Scale
- 1:3,750
64 m of St. Peter, Zurich, 19 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Slender spire
The tall, thin spire is the most delicate part of the model. Print slowly with good cooling, and use a 0.12–0.16 mm layer height to keep the tip sharp.
- Clock faces on the tower
Round clock dials sit near the top of the tower. A larger print size keeps them readable; Print friendly adapts them to the print scale, while Full detail keeps every modeled feature.
- One piece with the ground
St. Peter, Zurich is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. St. Peter, Zurich takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About St. Peter, Zurich
St. Peter counts among the four main churches in Zurich's old town in Switzerland, alongside the Grossmünster, Fraumünster and Predigerkirche. It sits beside Lindenhof hill, where a Roman castle once stood, and the church was built where a temple to Jupiter had stood. Archaeology attests to an early church, 10 by 7 meters, from the 8th or 9th century. Around AD 1000 an early Romanesque church replaced it, and a late Romanesque one followed in 1230, parts of which survive.
In 1460 the nave was rebuilt in Gothic style. Before the Reformation it was the town's only parish church, the others belonging to monasteries. In 1706 the present building was consecrated, the first built under Protestant rule. Johann Kaspar Lavater served as pastor from 1778 to 1801, and his gravestone is set in the church wall.
In 1450 the tower was raised to 64 meters (210 ft) and given a pitched helmet roof; its upper 24 meters (79 ft) were re-covered in 1996 with 42,000 larch shingles brought from the Engadine valley. The tower served fire police duties, with the first fire guard set in 1340, and a fire watch staffed the steeple until 1911. Each of the four clock faces measures 8.64 meters (28.3 ft) in outer diameter. The five bells, cast by Jakob Keller, date to 1880.
About this model
St. Peter, Zurich is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Same skyline


