3D print The Austonian
A free, printable model of The Austonian in Downtown Austin, with the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- Real height
- 208 m
- On a 160 mm print
- 56 mm
- Scale
- 1:3,750
208 m of The Austonian, 56 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Slender tower at small sizes
A slender residential tower can merge into a solid block at small sizes. Print larger or choose Full detail to keep the facade and roof edges crisp.
- One piece with the ground
The Austonian is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Austonian takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About The Austonian
The Austonian rises in Downtown Austin, Texas, as a residential skyscraper. It is 208 m (683 ft) tall and has 56 floors. Work began with a groundbreaking ceremony on August 31, 2007, and the exterior was finished in 2010 after almost 2.5 years of construction. The building opened in May 2010.
The 47th floor was poured on June 4, 2009, making the tower the second-tallest building in Austin. On July 1, 2009, it overtook 360 Condominiums and became the tallest building in the city. Residents began moving in during June 2010, after the building hosted the Women's Symphony League Designer Showhouse over May 15–16, 2010.
Austin Energy Green Building gave the tower a four-star rating in November 2010; it was the only residential high-rise in Downtown Austin with such a rating. In 2015, after concrete spalls fell from balconies, it was discovered that water had reached the steel rebar, which rusted and expanded. Repairs cost an estimated $13 million or more, and the work finished in 2019.
About this model
The Austonian is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
