3D print Torre Picasso
A free, printable 3D model of Torre Picasso in Madrid, with the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Torre Picasso in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 157 m
- On a 160 mm print
- 44 mm
- Scale
- 1:3,750
157 m of Torre Picasso, 44 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Slow printing for a tall tower
A tall, narrow tower rewards slow printing and good cooling near the top. A layer height of 0.12–0.16 mm keeps the vertical lines crisp, and a larger print size keeps small details.
- One piece with the ground
Torre Picasso is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Torre Picasso takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Torre Picasso
Torre Picasso, or Picasso Tower, is a Madrid skyscraper by the American architect Minoru Yamasaki, who worked together with Rafael Coll Pujol and Jorge Mir Valls. It stands beside Pablo Picasso Square, in the commercial complex AZCA on Paseo de la Castellana. The tower rises 157 m (515 ft) with 43 floors, and it was Madrid's tallest building between 1988 and 2007.
Work began in late 1982, stalled for a period, and was relaunched in 1985 under the architect Fernando Alas after new owners bought the incomplete structure. The building opened in December 1988. Each floor measures 38 m × 50 m, and the building has 26 elevators. The fastest ones, serving the 32nd to 43rd floors, run at 6 m/s, the fastest in Spain.
Its footprint is rectangular, and the two-storey base has no windows. A wide round arch forms the entrance and carries the façade above. White aluminum covers the façade, and the corners are chamfered. Windows on floors 3 through 43 come in pairs separated by a thin pier, and the parapet flares out into a cornice.
About this model
Torre Picasso is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
