3D print Tottenham Hotspur Stadium
A free, printable model of Tottenham Hotspur Stadium, its oval ribbed roof and open bowl, and the streets and buildings around it, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About Tottenham Hotspur Stadium
Tottenham Hotspur Stadium serves as a multi-purpose venue in Tottenham, London, England. The Premier League club Tottenham Hotspur owns and operates it, and it replaced the club's earlier ground, White Hart Lane. Seating 62,850, it ranks as England's third largest football stadium and London's largest club ground. It also hosts NFL International Series games, and it has a dividing, retractable synthetic turf pitch, the first in the world used for NFL games, as well as concerts and other events.
The stadium was the centerpiece of the Northumberland Development Project, which was meant to start a regeneration plan for Tottenham lasting 20 years. Conceived in 2007, the project was announced in 2008 and revised several times. Disputes and delays held up the stadium itself until 2015. It was built in two main phases, which let White Hart Lane stay in use through the 2016–17 season. An opening ceremony on April 3, 2019 came before the first Premier League game played there.
Populous, led by Christopher Lee, was responsible for the stadium's design. On July 8, 2015, the club announced a partnership with the NFL starting in 2019 and lasting 10 years, with a minimum of two games each year. The name Tottenham Hotspur Stadium was intended to be temporary, with the aim of selling the naming rights to a sponsor. Some fans and media outlets call it New White Hart Lane.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 16 mm | 1:3,750 |
| 200 mm | 20 mm | 1:3,000 |
| 256 mm | 25 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- Fine roof ribs and facade bracing
- The roof is ribbed with many thin radial lines, and the facade has narrow vertical panels and diagonal braces at the corners. Print friendly adapts them to the print scale; Full detail keeps them on larger prints.
- Wide, low bowl
- The stadium is wide and low, with an open bowl of tiered stands. A larger print keeps the rows of seating readable, and 0.12 to 0.16 mm layers help.
- One piece with the ground
- Tottenham Hotspur Stadium is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Tottenham Hotspur Stadium takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
Tottenham Hotspur Stadium is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a Tottenham Hotspur Stadium STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. Tottenham Hotspur Stadium grows with the print: about 16 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
