3D print the Tour D2
A free, printable model of the Tour D2 in the La Défense business district, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- Real height
- 171 m
- On a 160 mm print
- 47 mm
- Scale
- 1:3,750
171 m of the Tour D2, 47 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Tall tower, fine edges
A tower this tall prints best at a larger size, where the vertical edges and the upper section stay crisp. Use Full detail for a large print.
- Slow the upper section
Keep layers at 0.12 to 0.16 mm, and print slowly so a slender shaft stays straight.
- One piece with the ground
The Tour D2 is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Tour D2 takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Tour D2
The Tour D2 rises 171 m (561 ft) in the La Défense business district, which sits outside Paris, France. The skyscraper is an office building in the municipality of Courbevoie. Among the buildings of the Paris region it ranks 13th by height.
It has 37 floors above ground and opened in 2014. The roof carries a public garden above the offices. La Défense lies outside Paris, and the tower stands in the municipality of Courbevoie rather than in the capital city of France itself.
About this model
The Tour D2 is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
