Tour First in 3D
Tour First appears in city models you make here; its design may still be protected, so it isn't offered as a separate download.
-
North
-
East
-
South
-
West
Copyright notice
The design of Tour First may still be protected by copyright. It appears in the city models you make here, but it is not offered as a separate model.
- Real height
- 231 m
- On a 160 mm print
- 64 mm
- Scale
- 1:3,750
231 m of Tour First, 64 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Fins along the crown
Small pointed fins run along the stepped top and across the upper faces. Print friendly adapts them to the print scale; Full detail keeps them, which suits a larger print or a fine nozzle.
- A tall, narrow shaft
The tower is slender compared with its height. Print slowly with good cooling so the top stays straight, and layers of 0.12–0.16 mm keep the vertical lines crisp.
- One piece with the ground
Tour First is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Tour First takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Tour First
Tour First is an office skyscraper in the Paris metropolitan area's La Défense business district. Bouygues built the tower in 1974 for the insurer Union des assurances de Paris (UAP), and at that time it stood 159 m (522 ft) tall. Its footprint was a star with three points, with 120° between each branch. That shape was meant to symbolize the three French insurance companies whose merger gave rise to UAP. The building was previously known as Tour UAP and then as Tour Axa.
A major renovation ran from 2007 to 2011, completely changing the tower's exterior while adding extra height. The renovated tower, Tour First, has a roof that stands at 225 m (738 ft), and its spire brings the total to 231 m (758 ft). It has 52 floors, and its floor space comes to 86,707 m2, equal to 933,310 sq ft. The tower also lights up in different colors to indicate the next day's weather.
About this model
Tour First is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Same skyline





