A white 3D print of Upnor Castle, a walled fort with round corner towers and a pointed platform, standing at the water's edge with green banks and a path beside it.

3D print Upnor Castle

A free, printable model of Upnor Castle and the river and shoreline beside it, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Upnor Castle model, North view North
  • Upnor Castle model, East view East
  • Upnor Castle model, South view South
  • Upnor Castle model, West view West

© OpenStreetMap contributors

The model you print

Upnor Castle in 3D

The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.

Drag to turn it. Scroll or pinch to zoom.

On a 160 mm print
7 mm
Scale
1:3,750

7 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Battlements and round towers

    The crenellated walls and round corner towers carry the smallest details. A larger print size keeps them; Print friendly adapts them to the print scale, while Full detail keeps every modeled feature.

  2. Triangular gun platform

    The pointed platform juts out toward the water at the edge of the model. Printing slowly with good cooling and a 0.12–0.16 mm layer height keeps its sharp corners and the wall tops crisp.

  3. One piece with the ground

    Upnor Castle is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Upnor Castle takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About Upnor Castle

Upnor Castle, an Elizabethan artillery fort, sits on the River Medway's west bank in the Kent village of Upnor. It lies opposite Chatham Dockyard, a short distance downriver from it. Elizabeth I ordered its construction, which ran from 1559 to 1567, in a period of strained relations with Spain and other European powers. Its purpose was to guard the dockyard and Royal Navy ships anchored in the river.

The castle has a main building two stories high, ringed by a curtain wall and towers, and a triangular gun platform that juts into the river. Its garrison numbered about 80 men, and at its peak it mounted around 20 cannon of various calibers. Sir Richard Lee, a military engineer, drew up the designs, though others carried out the work because he was busy with the defences of Berwick-upon-Tweed. The main structure was finished by 1564, and altogether it cost £4,349.

In June 1667 a Dutch naval raid broke through the river defences, seizing two warships and setting others on fire at their moorings in Chatham. The castle fared better than many other defensive sites on the upper Medway, and gunfire from it and nearby emplacements made the Dutch withdraw after a couple of days. Afterward it lost its role as an artillery fortification and became a naval ammunition depot, staying in military hands until 1945.

About this model

Upnor Castle is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Keep exploring

More landmarks to print

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits