3D print Wrigley Field
A free, printable model of Wrigley Field and the dense city blocks around it on Chicago's North Side, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About Wrigley Field
Wrigley Field is a baseball park on Chicago's North Side, in Illinois. It is the home park of the Chicago Cubs, who share the city with one other major league team. It opened in 1914 as Weeghman Park, built for the Chicago Whales, Charles Weeghman's team in the Federal League; that league folded after the 1915 season. The Cubs' first home game there came on April 20, 1916. The park was later named for the Wrigley Company and seats 41,649.
It occupies an irregularly shaped block in the Wrigleyville neighborhood of Lakeview, with Clark Street to the west, Addison Street to the south, Waveland Avenue to the north and Sheffield Avenue to the east. It is the oldest ballpark in the National League, the second oldest in the major leagues after Fenway Park (1912), and the last remaining Federal League park. Its best-known features include brick outfield walls covered in ivy, a red marquee above the main entrance and a scoreboard turned by hand. In 1988 it became the last major league park to install lights for night games.
Ivy was planted along the outfield walls in 1937 by Bill Veeck, whose father was the club's president, and an upper deck was added in 1927. The Ricketts family, who purchased both the team and the ballpark in 2009, unveiled the 1060 Project in January 2013, a privately funded rehabilitation priced at $575 million and planned to take five years. In 2020 it was designated a National Historic Landmark.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 9 mm | 1:3,750 |
| 200 mm | 12 mm | 1:3,000 |
| 256 mm | 15 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- Thin rows of stepped stands
- The stands rise in many narrow tiers around the field. Print friendly adapts the thinnest rows to the print scale, while Full detail keeps every tier for a larger print or a fine nozzle.
- Light fixtures and the scoreboard
- Small fixtures along the roofline and the outfield scoreboard are slight and tall for their size. Print slowly with good cooling so they stay tidy, and a bigger print gives them more body.
- One piece with the ground
- Wrigley Field is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Wrigley Field takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
Wrigley Field is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a Wrigley Field STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. Wrigley Field grows with the print: about 9 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
