3D print Wuhan Center
A free, printable model of Wuhan Center among the surrounding city buildings of Wuhan, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- Real height
- 438 m
- On a 160 mm print
- 118 mm
- Scale
- 1:3,750
438 m of Wuhan Center, 118 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Print the tower tall
This tower is tall, so a larger print helps its upper floors and roofline; 0.12 to 0.16 mm layers keep the vertical edges clean.
- One piece with the ground
Wuhan Center is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Wuhan Center takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Wuhan Center
Wuhan Center is a skyscraper in Jianghan District, Wuhan, in Hubei province, China. The tower stands near Wuhan Business District Station. Construction on the building began in 2011, and it reached its full height on April 16, 2015. It was completed and opened in 2019.
At 438 meters, Wuhan Center is Central China's second tallest building. It was the first Wuhan building taller than 300 meters (980 ft). The tower rises 88 floors above ground and has 343,900 square meters of floor area. Oceanwide Holdings owns the building.
About this model
Wuhan Center is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
