3D print the Wuxi Maoye City – Marriott Hotel
A free, printable model of the Wuxi Maoye City – Marriott Hotel, a tall tower with a wide base, among the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Wuxi Maoye City – Marriott Hotel in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 304 m
- On a 160 mm print
- 83 mm
- Scale
- 1:3,750
304 m of the Wuxi Maoye City – Marriott Hotel, 83 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Tall tower on a wide base
A tall, slim shaft rises from a wide podium, with two lower wings beside it. Print slowly with good cooling, and use a layer height of 0.12–0.16 mm to keep the vertical lines crisp.
- Dense facade lines
The facade is covered in very fine lines. A larger print size keeps more of them, and Print friendly adapts them to the print scale.
- One piece with the ground
The Wuxi Maoye City – Marriott Hotel is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Wuxi Maoye City – Marriott Hotel takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Wuxi Maoye City – Marriott Hotel
Wuxi, in Jiangsu, China, is the site of the Wuxi Maoye City – Marriott Hotel, a supertall skyscraper that measures 304 m (997 ft). Work started in 2008 and wrapped up in 2014. It was one of the first supertalls built in the city.
Its core is reinforced concrete, with a glass curtain wall over the outside. On floors 26 and 46, belt trusses conceal the mechanical floor. At 304 m it counts as a supertall, with 68 floors above ground, and Maoye International is listed as its owner.
About this model
The Wuxi Maoye City – Marriott Hotel is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
